Filter
Top Products
Changing the Digital Security Code
To protect you against misbilled calls which might result from your phone being activated by other
equipment, the cordless phone provides AutoSecure (which electrically locks your phone when each
handset is in the cradle) and Random Code digital security which automatically selects one of over
262,000 digital security codes for each handset and the main base. If the handset battery pack is
completely discharged or the battery pack is removed, the digital security code will be lost. If this
happens, a new security code is set automatically the next time the battery pack is charged. In the rare
situation that you suspect another cordless telephone is using the same security code, you can change
the code.
For XSA1255;
1) Remove the handset from the cradle. Press and hold the find hs key on the main base.
2) While holding the find hs key, place the handset in the main base, and leave the handset in
the main base for more than three seconds. A new random security code is set.
For XSA1255+1;
1) Remove the handset from the cradle. Press and hold the find hs key on the main base.
2) While holding the find hs key, place the handset in the main base, and leave the handset in
the main base for more than three seconds.
3) Remove the handset from the main base. Then place the second handset in the main base and
wait for more than three seconds. No need to hold the find hs key this time.
4) Press the talk/flash key on one handset. Once you make sure Talk appears on the display, press
the end key. Then, try with the second handset. If each handset displays Talk, a new security
codes set. Otherwise, return to step 1 and try again.
ADDITIONAL INFORMATION
[50]