Filter
Top Products
17
If you encounter interference while using your phone
you can manually change the phones channel for
clear operation. Interference can come from
appliances or other phones in your home. This
function works only when the phone is in use.
The
chan button on the handset allows you to
choose between factory set channels (10 AUS/25NZ).
During the course of a conversation, if you hear static or noise which makes it
difficult to hear, press chan. The talk LED flashes, indicating the phone is
changing to another channel.
The Page/Find feature sends a signal from the base to the handset causing it to
beep. This is useful for locating the handset when it is away from the base. To use
this feature, press page/find on the base. The handset beeps for 60 seconds.
On the handset press any key (except talk button) or press page/find button on
the base to end the page.
When you begin to move too far from the base, you will first hear a clicking
sound. As you travel further out of range, the voice transmission will begin to
break up. If you pass the range limits of the base, your call will terminate.
TRAVELLING OUT OF RANGE
USING THE PAGE/FIND FEATURE
SELECTING A DIFFERENT CHANNEL
The paging feature does
not work when the phone is
in use.