Filter
Top Products
Answering System Troubleshooting Chart
Problem Suggestion
Answering System does not work.
• Make sure that the Base Unit is plugged in.
• Make sure the Answering System is turned on.
• Press the
reset
button to reset the system after
an AC line spike.
Answering System does not answer calls.
• Set the
rec time ANN/4/1
switch in either the
4-minute or 1-minute position.
• The memory may be full. Delete some or all of
the saved messages.
Messages are incomplete.
• The incoming messages may be too long.
Remind callers to leave a brief message.
• The memory may be full. Delete some or all of
the saved messages.
No sound on the Base Unit speaker during call
monitoring or message playback.
• Adjust the volume control on the Base Unit.
Cannot access remote call-in features from
another touch-tone phone.
• Make sure you’re using the correct
PIN
number.
• Make sure that the touch-tone phone you’re
using can transmit the tone for at least two
seconds. If it cannot, you may have to change
to another phone.
XCA550/55 29
550CH4.CHP
Fri Aug 01 15:28:59 1997
Color profile: Disabled
Composite Default screen