Filter
Top Products
Using _your XC345
le XC345 has dual keypads: one in the Handset, and one on the Base Unit.
lis is like having two phones because most operations can be performed
;ing either the Handset or the Base Units.
laking and Receiving Calls
he following features of your XC345 phone are different depending on the
,andset's location when you make or receive a call.
Note 1: Sometimes when you press ~ to hang up the phone, you may gE
an error tone and the phone will not disconnect. If this happens,
place the Handset on the Base Unit orpress ~ again while
holding the Handset close to the Base Unit.
Note 2: If the Handset is lifted from the cradle while the Base Unit is engage
with the outside line, the Base Unit will resume to Standby Mode ani
the Handset will switch to TALK Mode.
29
HANDSET
BASE UNIT
ON BASE UNIT OFF BASE UNIT
ANSWER
Pick
up Handset
Press
1) Press (sPEAKER)
CALL
(AutoTalk) The speaker
LED lights.
2) Talk into the
microphone.
Note: A call
causes the
IN USELED to
blink.
1) Pick up 1) Press
1) Press(sPEAKER)
Handset
2) Listen for dial 2) Listen for dial
MAKE
2) Press
tone tone
CALL
3) Listen for dial 3) Dial number 3) Dial number
tone
4) Dial number
HANG Press
Press (SPEAKER)
UP
ThespeakerLED
-OR-
goesoff.
Return Handsetto Base
(AutoStandby)
1) Pick up
1) PressC][)
1) Press(SPEAKER)
Handset
2) Listen for dial Thespeaker
REDIAL
2) Press
tone
LED lights.
3) Listen for dial 3) Press 2) Listen for dial
tone tone
4) Press 3) Press