Filter
Top Products
Installation
Selecting a Location
Before choosing a location for your new phone, there are some important
guidelines you should consider:
. The location should be close to both a phone jack and power outlet.
. Keep the Base Unit and Handsetaway from sources of electrical
noise such as motors or fluorescent lighting.
. Be sure there is sufficient space to fully extend the Base Unit
antenna.
. The Base Unit can be placed on a desk or tabletop or mountedon a
wall plate.
. If you decide to mount your phone on the wall, make sure to change
the handset retainer so that the tab which holds the Handset faces
up. (See page 16 for more information.)
. You should charge your new phone for 15-20 hours before
completing the installation or using the Handset.
Telephone Line Outlet
Modular Jack
Most phone equipment available now uses modularjacks. Phone
cords are fitted with a molded plastic connector which plugs into
this type of jack. If you do not have modular phone jacks, contar.t
your localtelephone company for informationabout their
installation.
8