Filter
Top Products
GETTING STARTED
GETTING STARTED [ 7]
• After installing the battery pack in the handset, charge your handset at
least
1155 hhoouurrss bbeeffoorree uussiinngg tthhee pphhoonnee
. Once the handset battery pack is
fully charged, connect the telephone line cord to the base and telephone
wall outlet.
• The location should be close to both a phone jack and a continuous power
outlet which is not switchable.
• Keep the base and handset away from sources of electrical noise such as
motors and fluorescent lighting.
• Be sure there is sufficient space to raise the base antenna to a
vertical position.
CCoonnnneecctt tthhee bbaassee uunniitt
1 Connect the telephone line cord
to the
TTEELL LLIINNEE
jack and to a
telephone outlet.
2 Connect the AC adapter to the
DDCC IINN 99VV
jack and to a standard
120V AC wall outlet.
3 Set the base unit on a desk or tabletop and place the
handset on the base unit as shown.
Then raise the antenna to a vertical position.
Place the power cord so it
does not create a trip
hazard or where it could
become chafed and
create a fire or
electrical hazard.