Filter
Top Products
ADDITIONAL INFORMATION[ 36 ]
Changing the Digital Security Code
The digital security code is an identification code used to connect the
handset and the base unit. Normally, setting the code is not necessary.
The first time you charge your handset, the security code is automatically set.
(See page 4.)
In the rare situation that you suspect another cordless telephone is using the
same security code, you can change the code.
1 Remove the handset from the
base unit. Press and hold .
2 While the handset is emitting the
paging sound, replace the
handset on the base unit. The
paging tone stops.
Leave the handset on the base for
more than 3 seconds. A random,
new security code is set.
If the handset battery
pack is completely
discharged or the battery
pack is removed, the
digital security code will
be lost. If this happens,
a new security code is
set automatically next
time the battery pack
is charged.
TRU346 8/9/00 12:38 Page 36