THE INTEGRATED ANSWERING DEVICE[ 42 ]
Setting the Time
The clock on the EXAI3985 answering system starts when power is applied
to the base. Follow these steps to set the clock to the correct time.
1 Press twice.
The system announces the current time. The message
counter displays [ ].
2 Press to select the day of the week.
You hear the current day and the number ([ ]
through [ ]) is displayed on the base.
3 Press or until the correct day is announced
and the corresponding number is displayed.
4 Press to select the day.
5 Press or until you hear the correct hour
setting. The numbers [ ] through [ ] are displayed
on the base as each hour is announced.
6 Press to select the hour.
7 Press or until you hear the correct minute
setting. The numbers [ ] through [ ] are
displayed on the base as each minute is announced.
8 Press to select the minute.
flash/set
flash/set
flash/set
flash/set
mute/menu
• Normally the idle time
for the menu mode is
20 seconds before the
system returns to
standby. However for
setting the time, the
idle time is extended to
two minutes.
• Press and hold or
to quickly scroll
through numbers on the
display.
note
mute/menu
memo/rec delete
ans. on/off
redial/p memory flash/set
status
EXAI3985 newstyle 3.3 5/30/1 10:30 AM Page 42