Filter
Top Products
[7] GETTING STARTED
www.uniden.com
•Use only the supplied
AD-314 AC adapter.
Do not use any other
AC adapter.
•Do not place the power
cord where it creates a
trip hazard or where it
could become chafed
and create a fire or
electrical hazard.
!
GETTING STARTED
C. Connect the Base Unit and Charge the
Handset
1) Connect the AC adapter to the DC IN 9V jack and to
a standard 120V AC wall outlet.
2) Place the handset in the base unit with the keypad
facing forward.
3) Make sure the charge in use LED illuminates.
If the LED does not illuminate, check to see that the AC adapter
is plugged in and the handset makes good contact with the base
charging contacts.
•Connect the AC adapter to a continuous power supply.
•Place the base unit close to the AC outlet so that you can
unplug the AC adapter easily.
4) Charge your handset at least 15-20 hours before plugging into
the phone line.
5) Once the handset battery pack is fully charged,
connect the telephone line cord to the TEL LINE
jack and a telephone outlet.If your telephone
outlet isn't modular, contact your telephone
company for assistance.
Uniden EXA3245.book 7 ページ ２００４年２月４日 水曜日 午後６時１８分