Uniden EXA7250 Cordless Telephone User Manual


 
[35] THE INTEGRATED ANSWERING DEVICE
www.uniden.com
Remote Access with the Handset
You can operate your answering system from another room using a handset.
•If you press the end key before the answering system answers, the phone will return to
standby.
•If the answering system does not answer within five seconds, you hear beeps and the
phone will return to standby.
•The base's keypad is disabled during remote operation.
•If you receive a call, the remote operation is canceled.
•During the remote operation [--] appears on the base.
•If you have new messages and old messages, only the new messages will be played. After
you have reviewed your new messages, you can play your old messages by pressing the
/2 key again.
1) With the phone in standby mode, press the remote key on the handset. The talk/batt low
LED flashes and turns on. The answering system announces the current time and the
number of messages stored in the memory.
2) You hear "To play incoming message, press two. For help, press zero."
You hear intermittent beeps.
3) Enter a command within 15 seconds. You may select a command from the following chart:
Command Function Command Function
/1
Repeat a Message
/5
Stop Operation
/2 Play Incoming Messages 6 Answering System On
/3
Skip a Message 9 Answering System Off
/4
Delete a Message 0 Voice Prompts
THE INTEGRATED
ANSWERING DEVICE
Uniden EXA3245.book 35 ページ 2004年2月4日 水曜日 午後6時18分