Filter
Top Products
[41] ADDITIONAL INFORMATION
www.uniden.com
Troubleshooting
If your phone is not performing to your expectations, please try these simple steps first.
Symptom Suggestion
The charge in use LED won't
illuminate when the handset is
placed in the base.
• Make sure the AC adapter is plugged into the base and wall outlet.
• Make sure the handset is properly seated in the base.
• Make sure the charging contacts on the handset are clean.
The audio sounds weak and/or
scratchy.
• Move the handset and/or base away from metal objects or appliances and try again.
• Press the channel key in the Talk mode to help eliminate background noise.
• Make sure that the handset is not too far from the base.
Can't make or receive calls. • Check both ends of the telephone line cord.
• Make sure the AC adapter is plugged into the base and wall outlet.
• Disconnect the AC adapter for a few minutes. Then reconnect it.
• Change the digital security code (see page 37).
• Make sure that the handset is not too far from the base.
• Check the dialing mode used by your telephone company.
Uniden EXA3245.book 41 ページ ２００４年２月４日 水曜日 午後６時１８分