Filter
Top Products
QUICK REFERENCE GUIDE [ 5]
Q
UICK
R
EFERENCE
G
UIDE
INSTALL THE AA BATTERIES
Remove the cover.
Install the batteries,
observing the correct
+ - polarity.
Replace the cover.
PLUG INTO AC POWER
Plug the AC adapter cord into the base unit and
then to a 120V AC outlet.
Place the handset in the base.
Note:
You must charge the batteries continuously
for 17-20 hours before using the phone.
Step 1 Charging the Batteries Step 2 Connecting
CONNECT TO A PHONE LINE
When the handset batteries are fully charged, plug the
telephone cord into the base unit and then into a
telephone wall jack.
Your phone is set for tone dialing. If your local network
requires pulse dialing, please see “Setting the Dial
Mode” on page 24.
Step 3 Using the Phone
SELECT CALLER ID OPTIONS
Press the MENU soft key in the standby mode.
Press volume/ ▲ or ▼ to select “Global
Setup”, then the OK soft key.
Press volume/ ▲ or ▼ to select “CIDCW”,
then the OK soft key.
Press volume/ ▲ or ▼ to select “CW
On/CWDX On”, “CW On/CWDX Off”,
or “CW Off/CWDX Off”, then the OK
soft key.
CHOOSE THE LANGUAGE
Press the MENU soft key in the standby mode.
Press volume/ ▲ or ▼ to select “Handset
Setup”, then the OK soft key.
Press volume/ ▲ or ▼ to select
“Language”, then the OK soft key.
Press volume/ ▲ or ▼ to choose a Language,
then the OK soft key.
SUN 12:00A
Handset #1
New: 5
MENU CID
RDL
PB
DCT5260-2_UP301BH UP01301BZ_1 1/16/03 10:04 AM Page 5