Uniden DCT5260-2 Cordless Telephone User Manual


 
EXPANDING YOUR PHONE[ 46 ]
Setting up an Extra Handset
1) Plug the AC adapter into the charging
cradle and then to a 120V AC wall outlet.
2) Remove the handset battery cover by
pressing on the indention and sliding the
battery cover downward.
Your phone supports up to 8 handsets (including the handset(s) supplied with your
phone). You can now place a fully featured cordless handset anywhere AC power is
available to connect the handset charger.
Up to 4 handsets can be used for an outside and/or intercom call.
For example, the phone permits 3-way conferencing (2 handsets and an outside line),
while on an intercom call using the other 2 handsets.
Expanding Your Phone
To use the DCX520,
register it to the
DCT5260 series base.
Save this manual for
detailed operation.
All of the handsets
ring when a call
is received.
IMPORTANT:
If you purchase a DCX520 extra handset, please register the handset to the DCT5260
series base before use. The DCX520 will not operate until it is registered.
If you change a setting of the Globe Setup menu in one of the handsets, you change
settings for all the handsets. For all other features they must be set separately
through each handset.
DCT5260-2_UP301BH UP01301BZ_1 1/16/03 10:04 AM Page 46