7
AUTOMATIC SQUELCH FEATURE
The UH060SX-2 is equipped with an Automatic Squelch System
which shuts off weak transmissions and unwanted noise.
MONITOR
This feature enables users to listen for weak
signals on the current channel at the press of a
button.
To use monitor:
• Press
moni
button. The
‘RX’
icon will flash.
• Release within 1.5 seconds and the unit exits Monitor mode.
• Press and hold
moni
button for 2 seconds for continuous
listening.
The receiver circuit will stay open, letting in both the noise &
weak signals. The
‘RX’
icon flashes in this status.
• To return to normal Receive mode press
moni
button. The
‘RX’
icon disappears or stops flashing in this status.
TRANSMIT Hi/Lo POWER SELECT
• Press
txp/ctcss
key momentarily to select
desired transmit level.
•
‘HI’
icon will appear on the display for
maximum transmit level.
•
‘LO’
icon will appear on the display for
minimum transmit level.
• No transmit level appears for the middle
transmit level
• The RF transmit power of the UH060SX-2 is
selectable between 0.1/0.5/1.5 W.
UT928ZH_UH060_ENG_0929 9/29/04 3:26 PM Page 7