Uniden UH044SX Two-Way Radio User Manual


 
UNIDEN Model uh044sx UHF CB Radio
OPERATION
16
GROUP SCAN(GS) Mode
To change between OS and GS scan;
1. Press four times.
GS setting ON or OFF will flash.
2. Press or to change the
selection.
3. Press and hold to save and
exit.
To initiate scanning,
1. When is pressed during
Group Scan Mode, SCN will blink
and Group Scan Scanning begins.
2. To deactivate GS scanning, press or .
1. If SCAN is deactivated while it is tuned to an active
channel, the uh044sx will stay on that active channel.
If none of the channels re- active, the uh044sx will
reinstate the Scan start channel.
2. If GS Scanning is initiated when there are no
channels programmed in GS memory, an error tone
will be heard and scanning will not start.
ENTER
MENU
MEM
DUAL
ENTER
TX
PWR
CALL
SCAN
MENU
ENTER
MENU