UNIDEN Model uh044sx UHF CB Radio
TRANSMIT POWER SELECT
The uh044sx has three transmit power levels: 2 Watt, 0.5 Watt
and 0.1 Watt. To change your transmit power level:
1. Press while in the 'power middle level' to change to
'power high level.'
2. Press while in the 'power high level' to change to the
'power low level.'
3. Press while in the 'power low level' to change to
'power middle level.'
TX Power Low TX Power Middle TX Power High
Transmitting on a higher level will use more Battery
power but will enable you to transmit further.
SCANNING
The uh044sx has two types of scanning; Open Scanning (OS)
and Group Scanning (GS), OS Scan searches all the channels
and frequencies in its memory continuously. GS Scan has the
ability of monitoring a priority channel every 1.5 seconds while
searching channels and frequencies in its memory.
Scanning allows you to search for active
channels programmed in the OS or GS
memory.
To initiate scanning,
1. Assuming the unit is on CH01 when
switched on.
2. Press and scanning starts.
Scan icon flashes during scanning.
OPERATION
14
MEM
DUAL
ENTER
TX
PWR
CALL
SCAN
MENU