Filter
Top Products
UNIDEN Model uh044sx UHF CB Radio
OPEN SCAN (OS) Mode (the absence of GS icon indicates
that the unit is on OS mode)
Allows continuous scanning of channels stored in the Open
Scan (OS) memory.
If an active channel is found, scanning will stop on that channel.
The factory has preprogrammed all the 40 UHF
channels into the Open Scan channel memory.
However, you can change or customise the channels
by following the steps on programming Scan Channels
on page 17.
Example. CH40 becomes active
If the received signal cease, the unit will
wait for at least 3 seconds for the signal to
return, otherwise scanning resumes.
To skip the active channel, press or . Scanning resumes.
To deactivate SCAN, press the or .
1. If SCAN is deactivated while in an active channel,
the uh044sx will stay on that active channel. If no
other channels are active, the uh044sx will reinstate
the starting channel.
2. If OS Scanning is initiated when there are no
channels programmed in OS memory, an error tone
will be heard and scanning will not start.
OPERATION
15