Filter
Top Products
THE INTEGRATED ANSWERING DEVICE [64]
www.uniden.com
3) The answering system announces the current time and the number of messages
stored in memory. You hear "To play incoming messages, press zero-two. For
help, press one-zero." You will hear a beep.
4) Enter a command within 15 seconds, each command there after must be entered
within 2 seconds. You may select a command from the following chart:
* For the Repeat a Message function, press 0 then 1 within about four seconds to
repeat the previous message, or press 0 then 1 after about four seconds to repeat
the current message.
**For the Memo Record and Greeting Message Record functions, the first time you
enter the corresponding command, the phone starts recording. If you want to
stop the recording, press 0 then 7, 8 or 5.
5) After the command has finished, you hear intermittent beeps indicating that the
system is in the command waiting mode. You may enter another command at this
time from the chart above.
Command Function Command Function
0 then 1
Repeat a Message*
0 then 6
Answering System On
0 then 2
Playing incoming Messages
0 then 7
Memo Record/Stop**
0 then 3
Skipping a Message
0 then 8
Greeting Message Record/Stop**
0 then 4
Deleting a Message
0 then 9
Answer System Off
0 then 5
Stop Operation
1 then 0
Help
•Time stamp will not be
heard until you have set
the time. See "Setting
Day and Time" on
page 29.
•The system will only
playback messages for
four minutes and then
it returns to the
command waiting mode.
To continue playing
your messages, press 0
then 2 again within 15
seconds.
•If you enter an
incorrect PIN code three
times, you will hear a
beep and the system
will return to standby.
•During the remote
operation,
Line
Remote
appears on the
display.
•If the answering system
is recording an
incoming message, the
recording operation is
canceled when you start
remote operation.
•For your convenience a
remote operation card is
provided for you to use
while away from home
(refer to page 88).
note
THE INTEGRATED
ANSWERING DEVICE