Filter
Top Products
THE INTEGRATED ANSWERING DEVICE [62]
www.uniden.com
Recording a conversation
You can record a conversation from the handset or the base (more than 2 seconds
and less than 10 minutes).
1) During a conversation, press the MENU soft key.
2) Press volume up/down to select
Call Record
, and then press the OK soft key.
Recording a Call
appears on the display.
A confirmation tone, that can be heard by both parties, sounds during recording.
3) To stop recording:
From Handset - press the MENU soft key and volume up/down to select
Call Record
.
You will hear a confirmation tone.
From Base - press play/stop. Or press the MENU soft key and volume/ or
volume/ to select
Call Record
. You will hear a confirmation tone.
Screening a call
From the base
To screen an incoming call, use the following steps:
1) After the answering system answers, the base speaker will let you hear the calls
as the machine records the message. To adjust the volume, press volume/ or
volume/ . If you set the answering system to off, you cannot screen a call.
•Every state has
different regulations
governing the
recording of
conversations over the
telephone. Make sure
to check your local,
state and federal laws
before using this
product to record any
telephone
conversation in order
to determine that your
use is in compliance
with such laws or
guidelines.
•To active this feature,
you must turn the Call
Screen feature on. See
“Answering System
Setup“, “Setting the
Call Screen“ on
page 28.
•If you press the
SCREEN soft key while
another handset is
screening a call, you
will hear a beep and
you can not screen a
call.
note
THE INTEGRATED
ANSWERING DEVICE