Filter
Top Products
38
From the base:
Press
[mute]. The speaker LED blinks while muting is on.
To cancel muting, press
[mute] again. The speaker LED stops blinking.
Seven-Digit Dialing
In some areas, the telephone company may allow you to place a local call by dialing only seven digits (instead of
ten). If this is the case in your area, you can program your local area code in your phone. Programming your area
code will allow you to see the caller’s seven-digit phone number which will allow you to easily return the local call
without modifying the number before dialing. If you get a call from outside your area code, you will see all ten digits.
To program your local area code:
Press
[menu/clear]. Select the GLOBAL SETUP menu, and then the AREA CODE submenu.
Use the number keypad (
[0] through [9]) to enter a three-digit area code. If an area code has already been
stored, it appears in the display. Press
[menu/clear] to delete the stored code, and then enter a new one.
Press
[select/ ]. You will hear a conrmation tone.
Tone Dialing Switch Over
If your phone is set to pulse dialing, you can temporarily switch to tone dialing after the call connects. This feature
is useful when you need tone dialing to use automated menu systems, such as telephone bank tellers, telephone
prescription rells, customer support menus, etc. Make your call normally. Once your call connects, press [
*
/tone]
on the handset or base. Any digits you enter from then on will be sent with tone dialing. When this particular call
ends, the phone automatically returns to pulse dialing.
See Changing the Dial Mode on page 1
5 for instructions on setting your phone for pulse or tone dialing.
Installing the Optional Headset
Your phone may be used with an optional headset. To use this feature, insert the headset plug
into the headset jack. Your phone is ready for hands-free conversations. (Headsets may be
purchased by calling the Uniden Parts Department. See back cover pag
e for contact information.)
1)
2)
1)
2)
3)