Filter
Top Products
14
Installing the Belt Clip
Line up the holes on each side of the handset. To attach the belt clip, insert into
the holes on each side of the handset. Press down until it clicks.
To remove the belt clip, pull either side of the belt clip to release the tabs from
the holes.
Connecting the Base and Charging the Handset
Connect the AC adapter (AD-800) to the DC IN 9V jack.
Connect the AC adapter to a standard 120V AC wall outlet.
DO NOT use an AC outlet controlled by a wall switch.
Place the handset in the base with the LCD screen facing
forward.
Make sure that the
charge LED illuminates. If the LED
does not illuminate, check to see that the AC adapter is
plugged in and the handset makes good contact with the
charging contacts.
Charge your handset at least 15 to 20 hours before
plugging into the phone line.
1)
2)
3)
4)
5)
To AC outlet
To DC IN 9V
AC adapter (supplied)
Route the cord.
Caution: To avoid risk of fire and shock, only
use the Uniden AD-800 AC adapter.
To AC outlet
To DC IN 9V
AC adapter (supplied)
Route the cord.
Caution: To avoid risk of fire and shock, only
use the Uniden AD-800 AC adapter.