Filter
Top Products
16
Wall Mounting the Base
This phone can be mounted on any standard wall plate.
Snap the wall mount adapter into the notches on the base top.
Plug the AC adapter into the
DC IN 9V jack.
Wrap the AC adapter cord inside the molded wiring channel as
shown.
Plug the AC adapter into a standard 120V AC wall outlet.
Plug the telephone cord into the
TEL LINE jack.
Plug the telephone cord into the telephone wall jack.
Align the mounting slots on the base with the mounting posts on
the wall. Then push in and down until the phone is rmly seated.
Notes:
DO NOT use an AC outlet controlled by a wall switch.
To mount the phone directly on the wall, insert two #10 screws
(minimum length of 1
3
/
8
inches, not supplied) into the wall, 3
15
/
16
inches apart; leave the screw heads
1
/
8
inch away from the wall to
allow room for mounting the phone. Be sure the wall is capable
of supporting the weight of the phone, and use the proper type of
anchoring device for the wall material.
1)
2)
3)
4)
5)
6)
7)
•
•
AC adapter (supplied)
Wall plate
AC outlet
AC adapter (supplied)
Wall plate
AC outlet