Filter
Top Products
– 13 –
3) Enter a command within 30 seconds. Select a command from the
following chart:
Remote Key Function
* For the Repeat a Message function, press 1 within about four
seconds to repeat the previous message, or press 1 after about four
seconds to repeat the current message.
** For the Memo Record and Greeting Message Record function, the
first time you enter the corresponding command, it starts the
Recording function. If you want to stop the recording, press 7, 8 or
5.
4) After the command has finished, you will hear intermittent beeps
indicating that the system is waiting for a command. You may enter
another command at this time from the chart above.
5) When you are finished, press end to exit the system.
Battery Information
Low battery alert
When the batteries are very low and need to be charged, the phone is
programmed to eliminate functions in order to save power.
The batteries need to be charged when:
- The empty battery icon appears.
-
Low Battery
appears in the display.
If the phone is in standby mode, none of the keys will operate.
If you are on a call, complete your conversation as quickly as possible,
and return the handset to the charging cradle.
|<</1 Repeat a Message* 6 Answering System On
/2
Playing incoming
Messages
7 Memo Record/Stop**
>>|/3 Skipping a Message 8
Greeting Message
Record/Stop**
∅/4 Deleting a Message 9 Answer System Off
/5 Stop Operation 0 Help Guidance
UU424BH(TCX805) OM.fm Page 13 Tuesday, June 21, 2005 9:37 AM