Filter
Top Products
t To attach the beltclip
Insert the beltclip into the holes
on each side of the handset.
Press down until it clicks.
t To remove the beltclip
Pull both sides of the beltclip
to release the tabs from the
holes.
INSTALLING THE BELTCLIP
13
If you have wall
mounted the base, you
must remove the beltclip
to charge the handset
with facing forward.
Your phone may be used with an optional
headset, the Uniden HS910. To use this
feature, simply plug the headset plug into
the headset jack. Your phone is ready for
hands-free conversation.
If you are using an optional headset, you must still
use the handset keypad for phone operations.
HEADSET INSTALLATION
Use only the Uniden
HS910 headset
specifically designed for
Spread Spectrum phones.
You may hear a buzz or
hum on other headsets.
Keep the headset wire
away from handset and
base antennas.