Filter
Top Products
15
Using the Intercom
Here are some general things you need to know about using the intercom:
Whenever the phone is in standby, you can make an intercom call
between handsets without using the phone line.
You can make an intercom call from any handset, but only two handsets
can be in an intercom call at any time.
If an outside call comes in during an intercom call, the phone displays
the Caller ID information. If the other handset hasn't answered the
page, the phone cancels the page so you can answer the incoming call.
Follow these steps...
make an intercom page
Press
CLEAR/INTERCOM
.
Select the handset you want to talk with (select
All
to page all handsets).
1.
2.
cancel a page Press
FLASH/EXIT
.
answer an intercom page Press
CLEAR/INTERCOM
or
TALK
.
leave an intercom call Press
FLASH/EXIT
.
answer an outside call
during an intercom call
Press
TALK
.
Using Privacy Mode
You can prevent other handsets from joining a call. Start your call as
usual, then press
SELECT/MENU
: the display shows
Call Privacy
. Press
SELECT/MENU
again to turn privacy mode on (you'll see a in the display).
When you hang up this call, privacy mode turns off automatically.
As long you have privacy mode on, no other handsets can interrupt your
call. If you want to let another handset join the call, repeat the process
above (press
SELECT/MENU
twice) to turn privacy mode off.
Using Special Features
Using Do Not Disturb
The Do Not Disturb (DND) feature turns off the audio ringers of the base
and all handsets at the same time. (It doesn't affect the visual ringers.)
With the phone in standby, press and hold
DO NOT DISTURB
on the base.
The phone shows
Do Not Disturb
in the display on all handsets.
To cancel, press
DO NOT DISTURB
.