Filter
Top Products
ACCESSING THE CALL WAITING SERVICE USING THE
CALL WAITING BUTTON (Australian Model only)
1. While talking, you hear the call waiting signal (series of beep tones).
2. Press the button then to switch call and put the current
call on hold.
3. To switch back to original call, press the button then .
MUTE
Press and hold the button to turn off the Handset microphone, allowing
private and confidential conversations in the same room without the calling party
hearing. Release the button to resume the conversation with the calling
party.
PLACING A CALL ON HOLD
1. To place a call on hold, press the button. The
status
LED will
flash green and you can hang up. (The Party on Hold will hear music).
2. To begin the conversation again:
Pick up the Handset or press the button or pick up an extension
phone, the hold function will then be automatically released.
MUSIC ON HOLD
When a call is placed on Hold, the
status
LED flashes and the telephone
will play a popular melody to reassure your caller that the call has not been
disconnected.
SPEAKERPHONE
To answer an incoming call, press the button and begin your
hands free SpeakerPhone conversation. Lift the Handset to resume normal
conversation
19
USING YOUR FP102
USING YOUR FP102
NOTE: The + call waiting procedure toggles call between the incoming
and the original call (vice versa). The + procedure will drop the
current call connection and pick up the incoming call or the call on hold.
FP102-OM.qxd 7/12/98 09:27 Page 19