Filter
Top Products
18
USING YOUR FP102
USING YOUR FP102
LED indicators
1.
call
LED indicator: Red light which flashes when the
telephone is ringing.
This is sometimes referred to as a ‘Visual Ringing Indicator’.
2.
status
LED indicator:
a. Solid red light when ‘In Use’.
b. Solid green light when in Speakerphone mode.
c. Flashing green light when on ‘Hold’.
PLACING A TELEPHONE CALL
1. Remove the Handset from the Base, or press the button.
2. Press the keypad buttons to dial the phone number you want.
3. After you have completed the phone call, place the Handset back on the Base.
REDIAL
If you want to redial the last number dialed, simply pick up the Handset or
press the button, then press the button. The telephone
will automatically redial the last number dialled.
RECEIVING A TELEPHONE CALL
When the phone rings, pickup the Handset from the Base, or press the
button and begin the conversation.
ACCESSING THE CALL WAITING SERVICE USING THE
CALL WAITING BUTTON (New Zealand Model only)
While talking you hear the Call Waiting beep signal.
Press the button. This feature sends a 600mS timed “hook-flash”
on the telephone line for accessing services such as Call Waiting, etc.
NOTE: You must subscribe to Telecoms Call Waiting Service before you can use this feature.
FP102-OM.qxd 7/12/98 09:27 Page 18