Filter
Top Products
AUTOMATIC DIGITAL CODE SECURITY
To avoid unauthorized calls on your phone, a digital code
was added to the EXV 990 phone. The handset and base
share this digital code. The number is selected randomly the
first time you use the phone.
▼
To change the digital code:
1) Place the handset on the base.
2) Press
page/find
on the
base. The handset will
beep for about 6 seconds.
3) Remove the handset from the
base until the beeping stops.
Return the handset to the base.
The
status
LED flickers
momentarily to indicate that
the digital security code is set
to one of the more than 65,535 codes.
▼
To reestablish communication
between the handset and base:
1) Restore power to the base.
2) Place the handset on the base.
The
status
LED flickers
momentarily to indicate that
the digital security code is set.
7
SETTING UP
If the base loses power
while the handset is off the
base, the digital code may
be erased. If this happens,
the handset won’t function.
Put the handset on the base
to reset the digital code.
C:\Exv990\exv990 1 of 2.vp
Wed Sep 09 09:09:34 1998
Color profile: Disabled
Composite Default screen