Filter
Top Products
ERASING A STORED NUMBER
1) Remove the handset from the base.
2) Press
store
. The
talk
LED blinks
and, in speaker mode, the
speaker
LED lights.
You will hear:
3) Enter the 2-digit memory location
number that you want to erase.
For example enter
0
then
1
.
You will hear:
4) Say “Yes.”
5) Press
store
. This erases the memory location
DIALING A STORED NUMBER
1) To dial a number from the handset,
remove the handset from the base.
Press
voice
.
To dial a number from the base,
press
VoiceDial
.
2) You will hear:
For example, if you have programmed John Smith in
location 01 at 555-555, you say “John Smith.”
Or, you can enter the two-digit memory location where John
Smith’s number is stored. For example: enter
0
then
1
.
You will hear:
3) The number will automatically dial.
15
When the voice prompt
says “Replace memory
[location number]. Say yes
or no,” if you don’t say
anything within 3 seconds,
you will hear “closer
please.” If you still don’t
respond, the handset beeps
and the programming
procedure cancels.
When you are ready
to talk on the phone,
press
speaker
to hear
through the handset
earpiece.
VOICEDIAL PROGRAMMING
C:\Exv990\exv990 1 of 2.vp
Wed Sep 09 09:09:52 1998
Color profile: Disabled
Composite Default screen