Filter
Top Products
Remote room monitor
You can call your answering system from any touch-tone phone
to monitor sounds in the room where your base is installed.
1 Call your telephone number.
2 While the greeting message is played, press # and your PIN
code.
3 The answering system begins announcing the time and day.
4 Press # then 5 to stop the messages.
5 Press # then . You hear sounds in the room where your
phone is installed. After 15 seconds, the answering system
returns to the command waiting mode.
6 Press # then to monitor the room for another 15 seconds.
Select another remote function or hang up to exit the system.
The answering system automatically returns to standby.
*
*
You cannot use # and
*
while the new messages
are playing. Press # then
5 to stop message
playback first and go to
step 5.
31