Filter
Top Products
22
3 Next, press or repeatedly until you
hear the correct hour setting. Numbers through display
on the base as each hour is announced. Press again
to select the correct time.
4 Press or repeatedly until you hear
the correct time setting. Numbers through display on
the base as each minute is announced. Press again to
select the correct time.
1 To turn the answering system on,
press .
The current greeting message is
played and a tone sounds.
2 To turn the answering system off,
press again.
Setting up your answering system
Turning the answering system on/off
answer on/off
Setting the clock
The clock on the EXS 2050 Answering System starts when power
is applied to the base. Follow these steps to set the clock to the
correct time.
1 Press and hold until a tone
sounds.
2 First, press or
repeatedly until the correct day of
the week is announced. (Numbers
through display on the base as
each day is announced.) Press
again to select the day.
clock
skip
repeat
Holding or
to scroll
through days, hours,
minutes, etc.
If you don't set the clock
within two minutes, the
system returns to standby.
skip
repeat
answer on/off
skip/
clock
skip
repeat
clock
skip
repeat
clock
If you have not recorded
your personal outgoing
message when you turn
the answering system on,
the preset message is
automatically set. To set
your personal message, see
page 23.
When the answering system is full, FL displays on the
base and the system announces “No remaining time”.
You should delete some messages so that the system
can record new messages.