Filter
Top Products
You hear a long beep and the
talk
LED goes out
indicating the number has been stored
successfully.
If you select any keys other than 0-9, the handset
will beep rapidly and no number will be stored.
Entering a Pause in Memory
Dialing
If you would like to use a phone number stored in
memory to access voice mail, for example, you can
store a pause in the phone number sequence.
To use this function, follow steps 1 and 2 in
“Storing a Number in Memory,” then press the
pause
button on the handset to place a pause in the
phone number sequence.
Follow the remaining steps in the “Storing a
Number in Memory” section to complete
the operation.
Storing Mixed Tone/Pulse
Numbers
If your phone is set up for pulse dialing, you can
store a mixed mode number (up to 16 digits) to
easily access long distance services.
1. Remove the handset from the base and press
mem
. The
talk
LED flashes.
2. Enter the number to be dialed in pulse mode.
3. Press the
/tone
button on the handset. The
/tone
button counts as one digit and enters
a pause.
4. Enter the number(s) to be dialed in tone mode.
5. Press
mem
and a number (0-9) on the keypad
for the memory location you wish to use. You
hear a long beep and the
talk
LED goes out.
Dialing a Stored Number
To dial a phone number stored in memory, press
talk
, then press
mem
and the memory location
(0-9). Your phone will dial the stored number.
One-Touch Dialing
Your phone is equipped with three “One-Touch
Priority” keys for instant dialing (
m1
,
m2
, and
m3
).
You cannot store phone numbers directly
into
m1
,
m2
, and
m3
. They are only used to dial
phone numbers stored into memory locations 1, 2,
and 3 on the keypad.
1. To instantly dial phone numbers stored in
memory locations 1, 2, or 3, simply press
m1
,
m2
,or
m3
. (There is no need to press
talk
, the
phone will automatically dial.)
2. If no phone number was stored in memory
locations 1, 2, or 3 on the keypad, pressing
m1
,
m2
,or
m3
will do nothing.
Chain Dialing
After dialing a number you may be requested to
enter a special access code, for example, when
performing a banking transaction.
1. Store the access code into one of the memory
locations (0-9).
2. Dial the main number.
3. Press
mem
and the memory location of the
access code at the appropriate time.
9
You hear a long beep and the
talk
LED goes out
indicating the number has been stored
successfully.
If you select any keys other than 0-9, the handset
will beep rapidly and no number will be stored.
Entering a Pause in Memory
Dialing
If you would like to use a phone number stored in
memory to access voice mail, for example, you can
store a pause in the phone number sequence.
To use this function, follow steps 1 and 2 in
“Storing a Number in Memory,” then press the
pause
button on the handset to place a pause in the
phone number sequence.
Follow the remaining steps in the “Storing a
Number in Memory” section to complete
the operation.
Storing Mixed Tone/Pulse
Numbers
If your phone is set up for pulse dialing, you can
store a mixed mode number (up to 16 digits) to
easily access long distance services.
1. Remove the handset from the base and press
mem
. The
talk
LED flashes.
2. Enter the number to be dialed in pulse mode.
3. Press the
/tone
button on the handset. The
/tone
button counts as one digit and enters
a pause.
4. Enter the number(s) to be dialed in tone mode.
5. Press
mem
and a number (0-9) on the keypad
for the memory location you wish to use. You
hear a long beep and the
talk
LED goes out.
Dialing a Stored Number
To dial a phone number stored in memory, press
talk
, then press
mem
and the memory location
(0-9). Your phone will dial the stored number.
One-Touch Dialing
Your phone is equipped with three “One-Touch
Priority” keys for instant dialing (
m1
,
m2
, and
m3
).
You cannot store phone numbers directly
into
m1
,
m2
, and
m3
. They are only used to dial
phone numbers stored into memory locations 1, 2,
and 3 on the keypad.
1. To instantly dial phone numbers stored in
memory locations 1, 2, or 3, simply press
m1
,
m2
,or
m3
. (There is no need to press
talk
, the
phone will automatically dial.)
2. If no phone number was stored in memory
locations 1, 2, or 3 on the keypad, pressing
m1
,
m2
,or
m3
will do nothing.
Chain Dialing
After dialing a number you may be requested to
enter a special access code, for example, when
performing a banking transaction.
1. Store the access code into one of the memory
locations (0-9).
2. Dial the main number.
3. Press
mem
and the memory location of the
access code at the appropriate time.
✱
✱
You cannot store numbers in
m1
,
m2
,or
m3
. Refer to “One-Touch
Dialing.”
Remember, the phone number you
wish to store cannot have more
than 16 digits, including the
pause. (The
pause
button counts as
one digit.)
If you select a memory location that
does not have a stored number, the
handset will beep rapidly and the
phone will not dial.
C:...Exp 6900 B of B.vp
Tue Jun 06 11:32:03 2000
Color profile: Disabled
Composite Default screen