Filter
Top Products
Erasing a Stored Number
1. Remove the handset from the base.
2. Press
mem
twice.
3. Press the memory location number (0-9) you
want to clear. You hear a long beep confirming
that you have erased the number.
Replacing a Stored Number
Remember, your EXP 6900 Series phone has 10
memory locations, represented by the numbers 0-9
on the keypad. If you store a phone number in one
of these locations, then attempt to store a different
number in the same location later, the new number
will replace the previous one.
Selecting a Different Channel
If you encounter interference while using your
phone, you can manually change the phone channel
for clearer operation. Interference can come from
appliances or other phones in your home. This
function works only when the phone is in use.
The
chan
button on the handset allows you to
choose between 30 factory set channels. During the
course of a conversation, if you hear static or noise
which makes it difficult to hear, press
chan
. The
talk
LED flashes, indicating the phone is changing to
another channel.
Using the Flash Button
Use
flash
for accessing services such as call waiting.
If you receive a call during your conversation, press
the
flash
button on the handset. Press
flash
again to
return to the previous call.
Using the Page/Find Feature
The Page/Find feature sends a signal from the base
to the handset causing it to beep. This is useful for
locating the handset when it is away from the base.
To use this feature, press
page/find
on the base. The
handset beeps for 60 seconds.
On the handset, press any key to end the page. If
you press
talk
, you must press
talk
again if you do
not wish to make a call.
Traveling Out of Range
During a call, as you begin to move too far from
your base unit, noise increases. If you pass the range
limits of the base, your call will terminate within
30 seconds.
10
Erasing a Stored Number
1. Remove the handset from the base.
2. Press
mem
twice.
3. Press the memory location number (0-9) you
want to clear. You hear a long beep confirming
that you have erased the number.
Replacing a Stored Number
Remember, your EXP 6900 Series phone has 10
memory locations, represented by the numbers 0-9
on the keypad. If you store a phone number in one
of these locations, then attempt to store a different
number in the same location later, the new number
will replace the previous one.
Selecting a Different Channel
If you encounter interference while using your
phone, you can manually change the phone channel
for clearer operation. Interference can come from
appliances or other phones in your home. This
function works only when the phone is in use.
The
chan
button on the handset allows you to
choose between 30 factory set channels. During the
course of a conversation, if you hear static or noise
which makes it difficult to hear, press
chan
. The
talk
LED flashes, indicating the phone is changing to
another channel.
Using the Flash Button
Use
flash
for accessing services such as call waiting.
If you receive a call during your conversation, press
the
flash
button on the handset. Press
flash
again to
return to the previous call.
Using the Page/Find Feature
The Page/Find feature sends a signal from the base
to the handset causing it to beep. This is useful for
locating the handset when it is away from the base.
To use this feature, press
page/find
on the base. The
handset beeps for 60 seconds.
On the handset, press any key to end the page. If
you press
talk
, you must press
talk
again if you do
not wish to make a call.
Traveling Out of Range
During a call, as you begin to move too far from
your base unit, noise increases. If you pass the range
limits of the base, your call will terminate within
30 seconds.
The paging feature does not work
when the phone is in use.
C:...Exp 6900 B of B.vp
Tue Jun 06 11:32:04 2000
Color profile: Disabled
Composite Default screen