Filter
Top Products
Desk or Tabletop Installation
1. Plug the AC adapter cord into the 9V DC input jack
on the base.
2. Wrap the AC adapter cord inside the molded
strain-relief.
3. Plug one end of the telephone cord into the
TEL LINE
jack on the base.
4. Place the telephone cord into the right molded
channel cord holder.
5. Plug the other end of the telephone cord into the
telephone wall jack. (Remember, the phone
must be fully charged before you can use it.)
6. Plug the AC adapter into a standard 120 V AC
wall outlet that is not controlled by a wall switch.
7. Raise the antenna
on the base.
Wall Installation
▼Setting the Handset Retainer for Wall
Mounting
1. Remove the
handset retainer
on the base by
sliding it upward.
2. Flip the retainer
over so the tab is
facing up.
3. Slide the retainer
back onto the
base.
▼Mounting on a Standard Wall Plate
The phone is designed to be mounted on a standard
wall plate.
1. Plug the AC adapter into the base.
2. Place the AC adapter cord inside the left molded
channel cord holder.
3. Plug one end of the telephone cord into the
TEL LINE
jack on the base.
6
Use only the AC adapter that came
with the phone.
C:...Exp 6900 B of B.vp
Tue Jun 06 11:32:00 2000
Color profile: Disabled
Composite Default screen