Filter
Top Products
ADDITIONAL
INFORMATION
ADDITIONAL INFORMATION [ 41]www.uniden.com
Troubleshooting
If your phone is not performing to your expectations, please try these simple steps first.
Symptom
The charge/in use LED
won't illuminate when the
handset is placed in
the base.
The audio sounds weak
and/or scratchy.
Can't make or receive calls.
Suggestion
• Make sure the AC adapter is plugged into the base and wall outlet.
• Make sure the handset is properly seated in the base.
• Make sure the charging contacts on the handset and base are clean.
• Move the handset and/or base to a different location away from metal
objects or appliances and try again.
• Press delete/channel to help eliminate background noise.
• Make sure that you are not too far from the base.
• Check both ends of the base telephone line cord.
• Make sure the AC adapter is plugged into the base and wall outlet.
• Disconnect the AC adapter for a few minutes, then reconnect it.
• Change the digital security code (see page 39).
• Make sure that you are not too far from the base.
EXI5160 7/30/3 5:45 PM Page 41