Uniden EXI 5160 Cordless Telephone User Manual


 
GETTING STARTED[ 10 ] www.uniden.com
4) Place the battery case cover back on the handset by sliding
it upwards until it clicks into place.
5) Place the handset in the base unit face forward for 15-20
hours without interruption. The base unit’s LED light
(labeled charge/in use) illuminates once the handset is
placed in the base. The LED light will illuminate regardless
if the battery pack is connected or not.
DO NOT rely on the LED light as an indicator that the
battery pack is connected and the handset is charging!
If the base charge/in use LED light does not illuminate:
• Check to see if the AC adapter is plugged into the base
unit and the electrical wall outlet properly. (Use only the
supplied AC adapter. Do not use any other AC adapter.)
• Check to see if the handset is sitting correctly in the
base and making good contact with the base unit’s
charging contacts.
Replacement batteries
are also available
through the Uniden
Parts Department at
(800) 554-3988,
Monday through Friday
from 8:00 a.m. to
5:00 p.m. or online at
www.uniden.com
The handset should
always sit in charging
cradle face forward to
make good contact
with base unit’s
charge contacts.
EXI5160 7/30/3 5:44 PM Page 10