Filter
Top Products
[14] GETTING STARTED
www.uniden.com
2) Press the /vol/ key to select
CIDCW
.
3) Press the select key to toggle and turn on Caller ID on Call Waiting.
4) Press the end key and return the handset to the base unit to complete the setting. The
handset returns to standby mode.
Entering Your Area Code
If you enter a 3-digit area code number in the
Area Code
option, your local area code does not
appear in Caller ID messages. Do not program this option if your calling area requires 10-digit
dialing. When reviewing Caller ID messages, you will see only the local seven digit number. For
calls received from outside your local area code, you will see a full 10-digit number.
1) When the phone is in standby mode, press and hold the caller id/
menu key. The following screen appears.
2) Press the /vol/ key twice to select
Area Code
.
3) Press the select key. If an area code was already stored, the
phone will display it.
4) Use the number keys (0 - 9) to enter the 3-digit area code. If you
make an error, use the delete/channel key to backspace.
5) Press the select key. A confirmation tone sounds.
6) Press the end key to complete the setting. The handset returns to standby mode.
GETTING STARTED
UP033BH_EXI7246C.book 14 ページ ２００４年１月１５日 木曜日 午前１１時４７分