Filter
Top Products
[10] GETTING STARTED
www.uniden.com
D. Mount the base unit on a wall
Standard wall plate mounting
This phone can be mounted on any
standard wall plate.
1) Locate the base unit on the wall
mount adapter as shown and slide
the wall mount adapter into the
notches on the base bottom with the
tab pressed.
2) Plug the AC adapter to the DC IN 9V
jack.
3) Route the AC adapter cord through
the molded wiring channel as shown.
4) Plug the AC adapter into a standard
120V AC wall outlet.
5) Plug the telephone line cord into the
TEL LINE jack. Route the cord
through the molded wiring channel
as shown.
6) Plug the telephone line cord into the
telephone outlet.
7) Align the mounting slots on the base
with the mounting posts on the wall.
Then push in and down until the
phone is firmly seated.
1
2
3
4
5
6
7
7
GETTING STARTED
UP033BH_EXI7246C.book 10 ページ ２００４年１月１５日 木曜日 午前１１時４７分