Filter
Top Products
5. Place the AC Adapter
cord inside the molded
channel.
6. Place the Base Unit on
the screws and push
down until it’s firmly
seated.
7. Plug the other end of the
telephone line cord into
the wall jack.
Note: Charge the
Handset for 15-20 hours
without interruption
before plugging the
phone line into your new
phone. See page 22,
Initial Battery Charging.
8. Plug the AC Adapter into a standard 120V AC wall outlet.
Note: Do not use an outlet controlled by a wall switch.
RING VOL DC IN 9V
OFF-LO-HI
PULSE-TONE
TEL LINE
+
-
16