Filter
Top Products
6. Plug the AC Adapter into
a standard 120V AC wall
outlet.
Note: Do not use an
outlet controlled by a wall
switch.
Use only the
Uniden AC Adapter
supplied with this phone.
Wall Installation
Standard Wall Plate Mounting
These phones are designed to be mounted on a standard AT&T or GTE wall plate.
1. Plug the AC Adapter into
the Base Unit.
2. Place the AC Adapter
cord inside the molded
channel.
Place the telephone cord
inside the molded
channel on the bottom of
the Base Unit.
Then plug the other end
of the telephone cord into
the modular jack on the
wall.
RING VOL
OFF-LO-HI
PULSE-TONE
DC IN 9V
TEL LINE
13