Uniden DXI386 Cordless Telephone User Manual


 
GETTING STARTED[ 6 ]
Read this First
This cordless telephone must be set up before use. Follow these steps:
Step 1 (page 7)
Unpack the telephone and accessories.
Step 2 (page 8)
Next, choose the best location to
set up the main base unit.
Step 3 (page 9 to 11)
Then, insert the battery packs into
the handsets. Connect the main
base unit and extra charging cradle.
You must charge the battery packs
for 15-20 hours before plugging
into the telephone line and using
the phone.
Step 4 (page 12)
After fully charging the handsets, remove the
handset from the extra charging cradle and place it
in the main base cradle for at least 5 seconds.
Conveniently, your cordless
phone allows you to transfer
outside calls from handset to
handset, simply by pressing the
transfer key. Not to worry,
conversations will not be
interrupted; only one handset at a
time can talk with an outside
caller. The second handset cannot
go off hook to listen to
conversations or make an
outgoing call while the other
handset is in use.
DXI386 6/7/2 10:51 AM Page 6