Filter
Top Products
[22]
Activating Name Tag (POP ID)
Activating the Insert 0
The Name Tag feature works with the Caller Display number from Caller ID. A subscription to the Caller ID service is
required from your network provider. There is usually a fee for this service. When the phone rings the received
Caller Display number is compared to numbers stored in the phonebook. If there is a match then any name stored
with the phonebook number will be displayed.
To turn Name Tag on or off, follow the steps below:
1. Press . Select the GLOBAL SETUP menu, and then the NAME TAG submenu.
2. Move the cursor to select On or Off.
3. Press . You will hear a confirmation tone.
This feature adds '0' or '00' to the number, when you receive Caller ID messages. The default setting for New
Zealand is On. The default setting for Australia is Off. To turn Insert 0 on or off, follow the steps below:
1. Press . Select the GLOBAL SETUP menu, and then the INSERT 0 submenu.
2. Move the cursor to select On or Off.
3. Press . You will hear a confirmation tone.
[menu/clear]
[select/ ]
[menu/clear]
[select/ ]