Filter
Top Products
Only numbers stored in
the Base Unit may be
dialled from the Base Unit.
!
10
STORING PHONE NUMBERS AND NAMES
The pause feature is useful
for long distance calling,
credit card dialing, or
sequences that require a
pause between digits.
With the Handset
Memory Dialing allows you to dial a number using
just a few key strokes. You can store up to 29 phone
numbers in the memory.
Since each step must be completed within 10
seconds, it may be advisable to review these
instructions before starting.
1. Press and hold until
MEMORY STORE is displayed.
2. Press or to select the memory
location where you would like to store the
number.
EDIT MEMORY 01
DELETE MEMORY 01
GO BACK
STORE NAME
MEMORY STORE
01 EMPTY
02 EMPTY
STORE NUMBER
STORE NUMBER
02 9597 9035
MEMORY 01 STORE
MEMORY STORE
01 FRED
02 JOHN SMITH
NOTE
When storing a number,
always include your area
code (eg: 02), so name
tagging will operate.
(refer page 16)
NOTE
With the Base Unit
1. Press . The status LED blinks.
2. Dial the number you wish to store (not to exceed
24 digits).
3. Press . Enter the one digit memory
location number to store the number.
3. Press - STORE NAME is displayed.
If this screen appears, the selected memory
location has a number already stored.
4. Use alpha numeric keys to enter the name.
The name cannot exceed 12 characters.
Use and to move the cursor
to the next letter - or to create a space.
Use to delete characters as
needed.
5. Press - STORE NUMBER is
displayed.
6. Use the number keypad to enter the phone
number. It cannot exceed 24 digits.
Use to enter a pause. The
screen displays P.
Each pause counts as one digit and
represents one and half second delay in
time between digits.
Use to delete digits as
needed.
7. Press - the handset beeps and
displays the confirmation screen.
8. Press to return to standby mode
or select another location to programme.
select
select
#
redial/p
select
memory
memory
memory
delete/page
delete/page
memory
9
(
(
0