Filter
Top Products
2
Compatible Bases
This handset is compatible with Uniden’s 1.8GHz DECT 6015
and DECT 6035 expandable phone series.
Installing the Accessory Handset
Checking the Package Contents
Make sure your package contains the following items. If any
items are missing or damaged, contact our Customer Service
Hotline. See inside the back cover page for contact information.
• Cordless Handset • Belt Clip
• Charger • Printed Material
• AC Adapter (model # AAD-600S: Input 240V AC, 50 Hz;
Output 9V DC, 210 mA)
• Rechargeable NiMH Battery Pack (model # BT-652: Capacity
650 mAh, 2.4V)
Installing the Battery
Follow the steps below to install the
rechargeable battery pack.
Using the fi nger indentation, press in on
the battery case cover and slide it down
to remove it.
Plug the battery connector into the
battery compartment jack. Be sure to
match the red and black wires to the
label near the jack.
Gently pull on the battery wires. If the
battery connector comes loose, try
connecting it again.
Replace the battery case cover and
slide it up until it clicks into place.
Note: Use only the Uniden BT-652
rechargeable battery pack supplied
with your cordless telephone.
1.
2.
3.
4.
DECT6005 OM.indd 2DECT6005 OM.indd 2 20/8/07 1:49:20 PM20/8/07 1:49:20 PM