Filter
Top Products
20
Registering DCX200 Accessory Handsets
If you purchase an accessory handset, you need to register the handset before use. Handset(s) supplied in the box
with the base are pre-registered at the factory. When charged, pre-registered handsets display a handset ID number.
Handsets that have not been registered display:
*CPFUGVPQV
TGIKUVGTGFRNCEG
JCPFUGVQPDCUG
↔
VQTGIKUVGT
5GG[QWT1YPGTU
/CPWCNHQTJGNR
To register an accessory handset:
Charge the handset for 15-20 hours.
Place the handset in the main telephone base cradle to initiate registration. HANDSET REGISTERING will
appear in the LCD.
Wait approximately thirty seconds, "REGISTRATION COMPLETE" will be displayed to indicate the handset has
been registered to the base and a handset ID will be automatically assigned.
If REGISTRATION FAILED appears in the LCD, please try these steps again.
Note: If an accessory handset has ever been registered to a base, you must reset the handset before you can
register it to a new base. See Resetting the Handset on
page 42.
Using Multiple Bases
DCX200 handsets and the handsets supplied with your phone can be registered to a total of four different
DECT2060 or DECT2080 bases. Once your handset is registered to more than one base, you can set the handset to
search automatically the available base, or you can select manually which base the handset should connect to (for
example, if you have one base with an answering machine, you can tell the handset to connect that base to check
messages).
1)
2)
3)