Filter
Top Products
13
Installing the Battery
Use only the Uniden BT-1008 rechargeable battery pack supplied with your cordless telephone.
Follow the steps below to install the handset battery.
Press in on the handset battery case cover (use the nger
indention for a better grip) and slide the cover downward
to remove.
Plug the battery cable into the battery jack. Be sure to
match the red and black wires to the label near the jack.
The cable should snap into place. Gently pull on the
battery cable. If the battery connector comes loose, try
connecting again until the battery snaps into place.
Place the battery case cover back on the handset and
slide it upwards until it clicks into place.
1)
2)
3)