Filter
Top Products
13
If… Try…
The handset won’t
display CID information.
Letting calls ring twice before answering.
Making sure your CID service is active.
-
-
I hear a beeping during
a call.
The battery is getting low. Check the
handset for a low battery alert. Finish
your conversation and return the handset
to the cradle as soon as possible.
-
Weak or Hard To Hear Audio
If a caller’s voice sounds weak or soft,
the signal might be blocked by large
metal objects or walls; you might
also be too far from the base or the
handset’s battery may be weak.
Try moving around while you’re
on a call or moving closer to
the base to see if the sound gets
louder.
Make sure the handset’s battery is
fully charged.
Try adjusting the earpiece volume.
Noise or �tac on the Lineoise or �tac on the Line
Interference is the most common cause of noise or static on a cordless
phone. Here are some common sources of interference:
electrical appliances, especially microwave ovens
computer equipment, especially wireless LAN equipment and DSL
modems
radio-based wireless devices, such as room monitors, wireless
controllers, or wireless headphones or speakers
fluorescent light fixtures (especially if giving off a buzzing noise)
other services that use your phone line, like alarm systems,
intercom systems, or broadband Internet service
If you have a hearing aid
equipped with a telecoil (T-coil)
feature, the interacon between
the hearing aid & digital cord-
less phones can cause noise
in the handset. If you have a
T-coil hearing aid & you have
problems with noise on the
line, try turning on
T-coil
mode.
Open the menu. Select
Handset
Setup,
then select
T-coil
.
Using T-coil mode can shorten
the handset’s talk me; make
sure to watch the baery status
and keep the baery charged.
•
•
If you have a hearing aid
equipped with a telecoil (T-coil)
feature, the interacon between
the hearing aid & digital cord-
less phones can cause noise
in the handset. If you have a
T-coil hearing aid & you have
problems with noise on the
line, try turning on
T-coil
mode.
Open the menu. Select
Handset
Setup,
then select
T-coil
.
Using T-coil mode can shorten
the handset’s talk me; make
sure to watch the baery status
and keep the baery charged.
•
•