Filter
Top Products
28
this problem. The technician who installed your DSL service might
have left some filters for you; if not, call your DSL provider or look in
any electronics store.
Plug the DSL filter into the telephone wall
jack and plug your phone’s base into the
filter. Make a test call to make sure the
noise is gone.
Resetting and Registering Handsets
If you are having trouble with a cordless handset or if you want to
replace one, you need to clear the registration information from the
base and the handset:
Do you have the base the handset is registered to?
Yes No
Press & hold
END
and
#
until the
System Reset
menu appears
(about 5 seconds).
Select
Deregister HS.
The display
lists all registered handsets.
Select the handset you want to
reset.
When the phone asks you to
confirm, select
Yes
. The handset
clears its information from the base
& deletes it own link to the base.
1.
2.
3.
4.
Press & hold
END
and
#
until the
System Reset
menu appears
(about 5 seconds).
Select
Base Unavailable
.
When the phone asks you to
confirm, select
Yes
. The handset
deletes its own link without
contacting the base.
1.
2.
3.
When you reset a handset (or if you buy a new one), that handset
displays a
Handset Not Registered
message. If you see this message
on a handset, you need to register it to a base before you can use it.
Registering a handset
On the base, open the menu and select
Register Handset
. The
display should say
Handset Registering
.
On the handset you want to register, press and hold
POUND (#)
until
the handset display says
Handset Registering (
about 2 seconds).
In about 30 seconds, the handset display should say
Registration
Complete
. Press
TALK/FLASH
and make sure you get a dial tone.
1.
2.
3.
DSL filter
Telephone
cord
Telephone
wall jack
DSL filter
Telephone
cord
Telephone
wall jack