Filter
Top Products
English - 15
USING SPECIAL FEATURES
Silent Mode
You can silence the ringers on the base and all handsets for a specific period of time;
the answering system answers any incoming calls without playing anything through
the speaker.
With the phone in standby, press and hold
#
on any handset. The phone prompts
you to select the number of hours (
1
-
9
or
Always On
) that you want it to stay in
silent mode.
To confirm, press
menu/select
or just wait about 5 seconds. The phone turns on
the answering system and displays
Silent Mode On
on each handset.
After the selected number of hours, the phone automatically exits silent mode.
To exit silent mode manually, press and hold
#
again.
If the phone is in silent mode and you turn off the answering system, the
phone exits silent mode.
Call Block
If you subscribe to Caller ID, you can save phone numbers to the call block list.
When a call comes in, the phone compares the received phone number to the
numbers on the call block list. If the phone number is on the list, the phone replaces
the caller's name with
Call Blocked
and blocks the call.
The call block list holds 20 entries, and all handsets share the same list. You can
add entries by selecting
Add Call Block
in the CID menu that displays after you have
viewed the CID record or through the
Call Blocking
menu (see below). (Only one
handset can edit the call block list at a time.)
Call Blocking Menu Options
With the phone in standby, open the menu and select
Call Blocking
. Choose one of
these options:
Menu Option What it does
View Number
See the numbers on your call block list.
Create New
Add an entry to your call block list. The phone will prompt
you to enter a name & phone number.
Private Number
Block all calls from numbers reported by CID as "Private."
(This does not count as one of the 20 entries.)
Unknown Number
Block all calls from numbers reported by CID as
"Unknown." (This does not count as one of the 20 entries.)
Call Blocking Entry Options
With the phone in standby, open the call block list and find the entry you want.
Press
menu/select
to open the individual entry menu. Choose one of these options:
1.
2.
3.