Uniden D2998-3 Telephone User Manual


 
English - 5
Set Up the Accessory Handset(s)
Install and Charge the Battery
1. Unpackallhandsets,batterypacks,andbatterycovers.
Ifanyhandsethasthebatterycoveralreadyattached,
pressinonthenotchandslidethecoverdownand
off.
2. Lineupthebatterypackconnectorwith
thejackinsidethehandset.(Thebattery
connectorwillonlyfitoneway.)
3. Pushthebatterypackconnectorinuntilit
clicksintoplace.Tuggentlyonthewirestomakesurethebatterypackis
securelyconnected.
4. Placethebattercoverandslideitupintoplace.
5. UseanACadaptertoconnectthepowerjackoneachchargertoaregular
indoor(120VAC)poweroutlet.
6. Placeeachhandsetinachargerwiththedisplayfacingforward.Ifthe
chargE
lightonthechargerdoesn’tlightup,reseatthehandsetorconnect
thechargertoadifferentoutlet.
#
Charge all handsets completely (about 15 hours) before using them.
Test the Connection
Pickupeachhandsetandpress
talk/enD
.Youshouldhearadialtone,andthe
displayshouldsay
Talk
.(Press
talk/enD
againtohangup.)
Ifthereisnoiseorstatic,seep.22fortipsonavoidinginterference.